![]() ![]() I press OK and the error message will go away, but at times it will reappear 4-5 times in row after that. Pfaff Ambition 610 error message "Please lower the presser foot!" when sewing with the presser foot already lowered. Flat side to the back and it threads front to back Needle is fully inserted and turned the correct way. Take up lever,then down through the thread guides to the needle. Should pull noticeably harder.) If it passes this test, continue up through the It should pull easily!! Lower the presser foot and pull the thread. Raise the presser foot and pull the thread through the (To do this test, adjust your tension setting to normal or medium or 5 or Through the tension assembly and test it to make sure the tension is working Thread through the thread guides to the tension assembly. ![]() It should stop winding when it is full.Īll machines thread the same. Release the handwheel(either by pulling out on the center of the wheel or twisting on the center of the wheel). Wrap thread around the bobbin, place the bobbin on the spindle sticking up. Guide your thread from the spool holder to the bobbin thread tension device on the top left side of the machine.(That's the round assembly that is about 1/2 inch in diameter with a screw in the center of it.) Pull the thread in the front and wrap it to the back and continue towards the bobbin winder on the right side top. Can't get a manual for you but here's how to wind a bobbin.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |